Sensor Operator Manual
The instructions below guide you through the sensor features.
Prior to use, verify the sensor arrived in good condition.
Wiring
Wiring can vary from board to board. Make sure yo connect them correctly, observing the abbreviations written on the board (PW, DT & GN), according to the color of the wire, as per instructions below.
µMETOS (29-0409)
Firmware: 3.24.20240527 - verify your station has this firmware. To the update, visit Firmware Update µMetos NBIoT (29-0409)
Input: SDI-12
PW: Vcc - brown wire
DT: Data - blue wire
GN: Ground - yellow-green or black wire
SH: Shield - not used
