FAQ
APN Settings
here you can download the FW uploader for i metos 1 ; i metos 2 and ECD2 and the FW for the stations i metos 1 ; i metos 2 and ECD2
Thu, 1 Feb, 2024 at 11:57 AM
How to recall stored data from the station through Terminal Program (TeraTerm or PI Service Terminal): To do that, please follow the steps: Conn...
Wed, 17 Jan, 2024 at 11:00 AM
Quick Guide PESSL TICKETING SYSTEM This document will assist you in submitting technical issue tickets for METOS hardware and software that is not wor...
Wed, 25 Oct, 2023 at 8:55 AM
The temperature recorded in the output, is it ambient or leaf temperature? The temperature sensor is measuring the ambient temperature inside the measureme...
Tue, 3 Oct, 2023 at 2:07 PM
iMETOS® 3.3 and iMETOS ECO have a set of 3 LEDs (Process LEDs) and an additional LED (Modem LED). The Process LEDs give information about the running proces...
Thu, 15 Jun, 2023 at 11:03 AM
To calibrate the rain gauge you need: Assembled rain gauge with double spoon, magnet, bridge, set screws and metal plate Ring wrench no 7 Rain bucket ...
Wed, 22 Mar, 2023 at 2:00 PM
To Check the Signal Quality of your iMETOS 3.3 with the Terminal Program you need: Notebook Jumper (Jumper RM2,54) USB to Mini USB cable Station wher...
Mon, 6 Mar, 2023 at 9:07 AM
Sensors Required Rain Air Temp Relative Humidity Leaf Wetness Barometric Pressure Soil Temperature Soil Water Tension Soil Water Content (VWC) ET...
Fri, 24 Feb, 2023 at 7:12 AM
You need: PC or notebook Jumper (Jumper RM2,54) USB to Mini USB cable Station which is not sending or from which station you would like to create a L...
Wed, 21 Dec, 2022 at 8:07 AM
Maintaining the PI Leaf wetness The filter paper which is used as a sensing element for the leaf wetness sensor is destroyed after to many wettings and d...
Thu, 24 Nov, 2022 at 10:26 AM