Station via USB Kabel mit dem PC verbinden.
Jumper auf Pin J1 anstecken
Terminal Programm (TeraTerm oder PI Service Terminal) öffnen und COM Port einstellen
dann sehen Sie das Menü
========================================================================================
USER: \ MAIN MENU
========================================================================================
(1) SYSTEM
(2) SENSORS
(3) MODEM SETTINGS
01/04/2019 10:59:01 >> Select...
Punkt (3) MODEM SETTINGS auswählen
Das Modem startet - das kann einige Minuten dauern
========================================================================================
USER: \ MAIN MENU \ MODEM SETTINGS
========================================================================================
(1) GET MODEM INFO
(2) SEND IDENTIFICATION SMS
(3) UNLOCK SIM CARD (PIN CODE)
(4) SIGNAL QUALITY GRAPH
(5) APN OF CUSTOMER
(7) DELETE ALL SMS
(ESC) BACK
Punkt (5) APN OF CUSTOMER auswählen
========================================================================================
USER: \ MAIN MENU \ MODEM SETTINGS \ APN OF CUSTOMER
========================================================================================
CURRENT APN ACCESS DEFINED BY USER:
-----------------------------------
-- There is not defined APN by user --
CHOOSE THE ACTION:
------------------
(I) INSERT NEW APN ACCESS
(D) DELETE DEFINED USER APN
(ESC) BACK
Dann (I) INSERT NEW APN ACCESS auswählen
Füllen Sie die neuen APN Einstellungen aus (MCC, MNC, APN access, APN user name and APN password)
Dann drücken Sie (ENTER)
========================================================================================
USER: \ MAIN MENU \ MODEM SETTINGS \ APN OF CUSTOMER \ INSERT NEW APN ACCESS
========================================================================================
SIM CARD INFO:
--------------
MCC of inserted SIM: 295
MNC of inserted SIM: 05
--------------------------------------------------------------------------------
Define items of APN access according instructions!
(Enter) <- confirm APN
(Esc) <- cancel & exit from this menu item ( without save )
--------------------------------------------------------------------------------
CREATE NEW APN:
---------------
Write new country name: SIM Country
Write new MCC: SIM MCC
Write new MNC: SIM MNC"
Write new APN access: SIM APN
Write new APN user name: SIM USERNAME
Write new APN password: SIM PW
-- New APN saved in system --
========================================================================================
USER: \ MAIN MENU \ MODEM SETTINGS \ APN OF CUSTOMER
========================================================================================
CURRENT APN ACCESS DEFINED BY USER:
-----------------------------------
User APN Country: "SIM Country "
User APN MCC: "SIM MCC"
User APN MNC: "SIM MNC"
User APN Account: "SIM APN"
User APN Name: " SIM USERNAME"
User APN Password: " SIM PW"
APN ist nun in der Station gespeichert
Wenn Sie den Connect Button drücken überträgt die Station mit Ihren neuen Einstellungen.