Prior to use, verify the product arrived in good condition.
Manual
NOTES: 1) This manual is intended for the METOS 5 board numbers 29-0419 and 29-0423. 2) The red marking in the image below indicates the location of the board number.
1) Download the latest release of the PI Service Terminal by clicking on THIS LINK.
HINT: In case you do not know how to install it, you may find THIS GUIDE useful.
2) Turn on the "Advanced mode" in the "Settings" menu and "Activate advanced mode":
Password: PIST2022
3) In the left section of the PI Service Terminal, find Advanced functions and choose "FW Uploader" from the drop-down menu:
4) Make sure that the firmware "Firmware_Metos53_X.XX.XXXXXXXX.bin" is uploaded into the field at the bottom of the FW Uploader section.
INFO: In case the firmware hasn't been loaded automatically or if you're looking to load an alternative firmware, you can manually load it by clicking on the field. The latest firmware release for the METOS 5 can be downloaded from Download the latest firmware for the METOS 5.
5) Plug the USB type-C in.
6) Power-on your METOS 5.
7) Click on "Connect".
INFO: If a SERIAL PORT does not appear, inspect your USB cable and the USB port on your computer.
8) Click on "Upload FW" and wait.
INFO: The firmware update takes place automatically. It is completed when the message "firmware successfully uploaded" appears.
CONGRATULATIONS! Your METOS 5 has successfully been updated.
INFO: To test your µMETOS NBIoT Clima sensors and their transmission, you may find this GUIDE useful.
NOTE: If you have any questions or need additional help, please submit a ticket to our Support team at https://metos.global/en/support/.